TENTS FOR INFLATABLE BOATS (2,3-4,7m)

• Designed to fit inflatable boats with low consoles and their outboard motors.
• Ideal for winter or long-term storage.
• Provides full protection for the boat.
• The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
• Double stiched – lapped seam with the highest quality UV threads that ensures an extended life expectancy.
• 6mm braided rope encased in hem , rope ratchet for easy gathering and tighten down the cover.
• Storage bag supplied.
• A full set of Rope Ends, Rope Cleats and Tie-down Rope.

1. Measure Boat Length
Measure in a straight line the centreline distance of your boat from Bow to Stern.

2. Measure Beam Width
Measure in a straight line the distance across the beam (widest point of your boat)

3. Measure Height (from gunwale)
Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g.cabins, windscreens etc.

NOTE:  It is recommended that both measurement instructions are used to help you choose the correct cover size.

OVERALL FABRIC MEASUREMENTS

1. Measure Fabric Width
Using the ‘overall cover fabric width‘ measurement of your chosen cover, measure across the widest point of your boat, over the top of any boat fittings
e.g. cabin, windscreens etc.to the point on the hull where the cover’s hem will finish.

1. Measure Fabric Length
Using the ‘overall cover fabric length ‘ measurement of your chosen cover, measure along the length of your boat, over the top of any boat fittings e.g. cabin, windscreens etc. to the point on the hull where the cover’s hem will finish

Overall Cover Dimensions

W FABRIC WIDTH

L FABRIC LENGTH